GK1000 ESD Table Mat Grounding Kit

Buy Now

Item #: GK1000

  • Kit for grounding ESD table mats
  • Includes 15ft low profile ground cord, and a universal snap
  • Can be installed with a Philips head screw driver.
  • Snap includes two screw lengths for thick or thin material
    • 0 $
Quantity:

Description

Easy to install kit to ground ESD table matting and up to two ESD wrist straps.

Transforming Technologies GK1000 Table Mat Ground Kit offers the hardware required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20 to ground an ESD table mat

The CP2522 is a low profile common point ground with two banana jacks which allow two workers the ability to plug into onto one ground point. The molded connection point houses a 1 meg Ohm 1/4 watt resistor and attaches to table mats via the CS1090 universal snap kit.

Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1.

ESD Standards require 1 ground point per mat or every 10ft of ESD matting.

Additional information

Weight 1 lbs
Dimensions 3 × 3 × 1 in
Type

Ground Cords

Resistor

1Meg and 0Meg

This product is available online from the following resellers:

Translate »