Test Equipment

Showing all 65 results

Warmbier METRISOÂ® 3000 ESD Audit Kit

The METRISOÂ® 3000Â ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020 Â and IEC 61340-5-1 and for qualification /

More Info Add to cart

Warmbier METRISOÂ® B530 ESD Audit Kit

The METRISOÂ® 3000Â ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020 Â and IEC 61340-5-1 and for qualification /

More Info Add to cart

Warmbier EFM51.VK Electrostatic Field Meter Verification Kit

Verification Kit for measuring electrostatic fields and electrostatic charges, as well as the body voltage of a person while performing the walking test. Additionally, the decay time and the offset

More Info Add to cart

Warmbier EFM51 Plus Electrostatic Field Meter

EFM51 Plus - Field Meter with Case

The Wolfgang Warmbier EFM51 Plus is a handheld meter to quickly detect and measure electrostatic charge accumulation on surfaces. The EFM51 Plus is a full-featured hand-held field meter used to

More Info Add to cart

Warmbier EFM51 Electrostatic Field Meter

The Wolfgang Warmbier EFM51 is a handheld meter to quickly detect and measure electrostatic charge accumulation on surfaces. The EFM51 is a full-featured hand-held field meter used to perform static

More Info Select options

282 Pocket-sized, Noncontacting Static Meter

The 282 is a pocket-sized, noncontacting static meter which produces a consistently accurate measurement of charges, and is easy to use. The282 is used to perform static surveys and evaluate charge

More Info Add to cart

282-IS Intrinsically Safe Static Meter For for Hazardous Locations

The 282-IS is a full-featured hand-held field meterÂ used to evaluate charge accumulation in hazardous environments where the atmospheric mixture may ignite. The282-IS is used to perform static

More Info Add to cart

EFM115 Electrostatic Field Meter and Ion Balance Tester

The EFM115 is a convenient electrostatic field meter used to locate and measure static charges and test the balance of air ionizers. Static Field MeterÂ Its compact design and four button

More Info Add to cart

Warmbier ESD Starter Kit with Field Meter and SRM Meter

A kit to test basic ESD measurements such as surface resistivity and electrostatic fields. A complete and very useful tool kit for testing and measuring different products and materials within an

More Info Add to cart

Warmbier 7100.EFM51.CPS.SET Charge Plate System without EFMÂ® 51 (for retrofitting)

7100.efm51.cps Charged plate set without EFMÂ® 51 for retrofitting

The Wolfgang Warmbier EFM51.CPS is used to retrofit the EFMÂ® 51Â to enable the meter to measure and evaluate an ionizer'sÂ efficiency. The Warmbier 7100.EFM51.CPS.SET includes a High Voltage

More Info Add to cart

Warmbier EFM51.CPS Charge Plate System and Field Meter

The Wolfgang Warmbier EFM51.CPS is used to measure and evaluate an ionizer'sÂ efficiency as well as fullyÂ functioning field meter. The EFM51 is a full-featured hand-held field meter used to

More Info Add to cart

Warmbier Walking Test Kit WT5000 Electrometer

Perform the ESD Walking Kit on Floors: Test and graph the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The WT5000 Walking Test Kit has

More Info Add to cart

Warmbier EFM51WT Field Meter Walking Test Kit

A hand-held meter used to test the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The electrostatic charge of a person walking on an ESD

More Info Add to cart

Warmbier METRISOÂ® 3000 High Resistance Test Kit

A Surface Resistance Test Kit capableÂ of measuringÂ a wide resistance range and complete the tests required for an ESD protection plan. The METRISO 3000 test kit measures a wide range of

More Info Add to cart

Warmbier METRISOÂ®B530 Surface Resistance Test Kit

Take quick and accurate ESD measurements of materials with this high resistance testing kit. The MetrisoÂ® B530 test kit efficiently measures a wide resistance range and is suitable for

More Info Add to cart

Warmbier SRM200 Pocket Digital Surface Resistance Verification Kit

Full-featuredÂ digital Surface Resistance Meter with lightweightÂ travel probes, two-point probe, data storage, temperature and humidity testing! SRM200 is a very useful instrument for

More Info Add to cart

Warmbier SRM200 Pocket Digital Surface Resistance Meter

Full featuredÂ digital Surface Resistance Meter with data storage, temperature and humidity testing! SRM200 is a very useful instrument for checking surface resistance and resistance to ground.

More Info Add to cart

Warmbier SRM110 Pocket Digital Surface Resistance Test Kit

Quickly and accurately take ESD resistance measurements with the Warmbier SRM110.Â The LED readout will report the resistance in powers of 10 (example 10^10) and indicate if the surface is

More Info Add to cart

SRM500K Digital Surface Resistance Test Kit

The SRM500K is a digital surface resistance test kit designed to test all conductive, anti-static and static dissipative surfaces for electrical resistivity/ resistance according to EOS/ESD, CECC,

More Info Add to cart

SRM310 Pocket Digital Surface Resistance Test Kit

Pocket-sized, battery-powered Surface Resistance Meter is easy to use, transport and test. This SRM 310 uses built-in parallel electrodes to accurately measure electrical resistanceÂ for

More Info Add to cart

SRM330 Lightweight Travel Surface Resistance Meter Kit

SRM330 Surface Resistance Meter Kit

The ultimate travel kit for testing materials for electrical resistivity/resistance - Lightweight and portable! The battery powered SRM330 is equipped with built-in parallel electrodes for quick

More Info Add to cart

Warmbier 7220.880.SET Concentric Ring Probe Model 880, with Carrying Case

The 7220.880.SET concentric ring probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The

More Info Add to cart

Warmbier 890 Two Sided Probe

The 890 two-side probe is two ESD testing probes in one: a 5lb disk probe and a concentric ring probe.Â Â The 890 two-sided probe is used with a surface resistance meter to take volume

More Info Add to cart

SR0065 5lb Surface Resistance Probes

5lb Disk Electrode Probes for use with Surface Resistance Meters Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in accordance with ESD Association Standards. The probe

More Info Add to cart

Warmbier 7220.410 Two Point Probe

The Wolfgang Warmbier 7220.410 two-pointÂ probes measures point-to-point surface resistance of small areas The 7220.410 two-point probe are designed to measure surface resistance of small areas.

More Info Add to cart

Warmbier 7200.CL.49 Clamp Probes for Testing ESD Garments

olfgang-warmbier-7200.CL-49 ESD Garment-testing-clamp

The Wolfgang Warmbier 7200.CL.49 clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20 The 7200.CL.49 clamps probes are designed to evaluate ESD garments accounting ANSI

More Info Add to cart

Warmbier 7220.45 Hand Probes for Testing ESD Floors

wolfgang-warmbier-hand-probe-7220

The 7220.45 hand probes are designed to be used with resistance meters to evaluate ESD flooring according to ANSI ESD20.20. The probe is held in the hand and ensures excellent contact with skin while

More Info Add to cart

Warmbier TF-530 Digital Thermo-Hygrometer

wolfgang-warmbier-7100-tf530-thermo-hygrometer-wolfgang-warmbier

The TF-530 measures temperature and humidity which are required during ESD testing. The TF-530 Digital Thermo-Hygrometer is an easy-to-read and economical way to track temperature and humidity

More Info Add to cart

Warmbier 900 Backrest Probe

Probe used to take accurate resistance measurements of ESD chairs. The 900 Backrest probe is designed to evaluate ESD chair back-rests according to ANSI ESD20.20. The clamp ensures excellent

More Info Add to cart

Warmbier 7100.VB – Veribox

7100VB - Veribox From Warmbier

VerifyÂ ThatÂ YourÂ ESDÂ TestÂ EquipmentÂ areÂ OperatingÂ Correctly with theÂ Warmbier 7100.VB - Veribox. Warmbier 7100.VB - Veribox is for the periodic verification of ESD test

More Info Add to cart

Warmbier 15 Glove Probe

Probe used to take accurate resistance measurements of ESD Gloves. Model# 15 Glove probe is designed to evaluate ESD gloves according to ANSI ESD20.20. The probeâ€™s weight ensures excellent

More Info Add to cart

Warmbier 7220.870.V.SET Extension Handle For Use with Probes

7220.870.v.set Probe Handle

Make testing floors easier with an extensionÂ handle for probes used to take resistance measurements. Model 7220.870.V.SET extensionÂ handle eliminates the need to bend to pick up and move ESD

More Info Add to cart

Warmbier 7100.2000.TR50 – 50ft Cable Reel

7100.200.TR50 50ft Cable Reel

Make testing floors easier with a 50ft cable reel used with probes to take resistance measurements over large areas. Warmbier 7100.2000.TR50 - 50ft Cable Reel allows you to take resistance

More Info Add to cart

SR0055 5lb Surface Resistance Probes

Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in accordance with ESD Association Standards. The probe can be used to make measurements on floors, mats, workbenches,

More Info Add to cart

CAL1000 – Calibration Verification Device

CAL1000

The CAL1000 device is used to facilitate easy, in-house, calibration verification of most ESD testers and surface resistance meters. The CAL1000 is designed to verify that testers calibrated to

More Info Add to cart

CM400 – Single Wire Continuous Monitor, One Operator Only

CM400 ESD Single Wire Constant Monitor

A single wire constant monitor for one wrist strap only. The CM400 single wire constant monitor continuously checks the total grounding system, including the operator, the wristband and the coil

More Info Read more

CM410 – Single Wire Continuous Monitor, One Operator, One Workstation Mat

A single wire constant monitor for one wrist strap and one worksurface. The CM410 single wire monitor continuously checks the total ground loop, including the operator, the wrist band, the coil

More Info Read more

CM420 – Single Wire Continuous Monitor, Two Operators, One Workstation Mat

A single wire constant monitor for two wrist straps and one worksurface.Â The CM420, single wire constant monitor continuously checks two operators wrist straps and a workstation ground and

More Info Read more

RangerONE Dual Wire Constant Monitor – Model CM1601

Dependable and accurate dual wire monitor for one person. The RangerOne is an extremely sensitive monitor that accurately measures the electrical resistance of an ESD wrist band and signals if the

More Info Read more

RangerTWO Dual Wire Constant Monitor – Model CM1602

CM1602-resistance-ranger-dual-wire-constant-monitor

Dependable and accurate dual wire monitor for one person and one work surface. The Resistance Ranger Series is the most reliable workstation monitoring system available. The extremely sensitive

More Info Read more

RangerPRO Dual Wire Constant Monitor – CM1600

Versatile, Dependable, and Accurate Resistance Based Constant Monitor System The RangerPRO constant monitor is the premiere workstation grounding system available. A continuous pulse of an

More Info Read more

RangerNET Dual Wire Constant Monitor – Model CM2815

A network read dual wire constant monitor for two people and two work surfaces with data logging capabilities Transforming Technologies' RangerNET constant monitor is the premiere work station

More Info Read more

RangerBOSS Dual Wire Constant Monitor – Model CM2800

A network-ready dual wire constant monitor for two people and two work surfaces with adjustable alarm limits, and data logging capabilities.Â The RangerBOSS dual conductor workstation monitor

More Info Read more

CM2015 Periodic Verification Tool

Quickly and accurately verify the calibration of the Ranger Series dual wire resistance constant monitors. The CM2015PV is a resistance box with fixed 5% precision resistors. Resistance decade

More Info Read more

CM410PV – Periodic Verification Tool For CM400 and CM410

Transforming Technologies' constant monitors are designed to be adjustment free. Annual calibration is not necessary. If a quality program requires testing, verification tools that simulate a

More Info Read more

CM420PV – Periodic Verification Tool For CM420

Transforming Technologies' constant monitors are designed to be adjustment free. Annual calibration is not necessary. If a quality program requires testing, verification tools that simulate a

More Info Read more

Alarm Relay for the Resistance Ranger Constant Monitors

CM RELAY for Constant Monitor

Use the CM-RELAY to add an external signal to your Resistance Ranger Constant Monitor. The CM-RELAY allows a signal such as a Light Tower or Alarm to be added to the monitor system to magnify the

More Info Read more

Resistance Ranger Metal Wrist Strap Remote Jack

Metal Remote Jack

Replace your plastic Resistance Ranger Constant Monitor wrist strap remote jack with a metal jack. Works with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from

More Info Read more

Ground Cord for the CM400, CM410, and CM420 Constant Monitors

CM410-GND-ground-cord-for-CM400-CM410+CM420

A replacement ground cord for the CM400 Series Constant Monitors. The CM410-GND ground cord connects the CM400 Series constant monitors to the ground cord of your work surface.Â The CM410GDN

More Info Read more

CP3000 parking jack for Dual Wire Constant Monitors and Wrist Straps

The CP3000 parking station for dual conductor wrist straps provides the user with a jack that will allow an operator to disconnect and leave the dual conductor cord at the workstation without the

More Info Read more

CYCLOPS operator presence sensors – Stainless Steel Case

Stainless Steel Cyclops Wrist Strap Remote

The CYCLOPS will cause a constant monitor to alarm if an operator approaches the workstation without connecting their wrist strap. CYCLOPSÂ™ operator presence sensors, from Transforming

More Info Read more

CYCLOPS operator presence sensors

The CYCLOPS will cause an alarm if an operator approaches the workstation without connecting their wrist strap CYCLOPSÂ™ operator presence sensors, from Transforming Technologies, assure

More Info Read more

Access PRO: PGT120 Tester and FastPass Turnstile System

PGT120K100 AccessPRO with FastPass

The AccessPRO system with the PGT120 and the FastPass turnstile tests personnel grounding devices, logs test data and user IDs and controls access to an ESD protected area. The PGT120

More Info Add to cart

Warmbier PGT120.COM Data Logging ESD Tester

AÂ complete data logging ESD test station for ESD heel straps/footwear and wrist straps. The PGT120.COM ESD grounding tester takes quick and accurate resistance measurements of ESD wrist straps,

More Info Add to cart

Warmbier PGT120 Combination Tester for Personal Grounding Equiptment

The PGT120 is an easy to use and complete test station for ESD shoes and wrist straps. The personnel grounding tester is able to perform a quick and accurate control measurement of the ESD

More Info Add to cart

Warmbier PGT120.COM.DT2 Data Terminal For the PGT120.COM

The Data Terminal 2 for the Wolfgang Warmbier PGT120.COM creates a data logging ESD tester system that can integrate many USB accessories. The PGT Data Terminal 2 (DT2) is a modular system that

More Info Add to cart

Warmbier 7100.PGT120.COM.TC18 Data Terminal With Touch Screen For the PGT120.COM

The 7100.PGT120.COM.TC18 with Touch and Data Terminal for the Wolfgang Warmbier PGT120.COM Pair the PGT120.COM tester unit with the 7100.PGT120.COM.TC18Â Touch Screen and Data Terminal and you

More Info Add to cart

Warmbier PGT120.COM.DT3 Data Terminal with RFID For the PGT120.COM

7100-pgt120-com-dt3

The Data Terminal 3 for the Wolfgang Warmbier PGT120.COM Pair the PGT120.COM tester unit with the PGT120.COM Data Terminal3 and you receive real-time ESD testing with personnel identification,

More Info Add to cart

PDT800K Deluxe “Near -Fail” Combo Wrist Strap and Footwear Testing Station

PDT800K Combo ESD Tester

Easy, accurate, and time-savingÂ one-touch digital wrist strap and footwear tester with â€œNear-Failâ€ alert that tells you when your grounding devices are nearing failing

More Info Add to cart

PDT700K – Near -Fail” Combination Wrist Strap and Footwear Testing Station

Easy, accurate, and time-savingÂ one-touch digital wrist strap and footwear tester with "Near-Fail" alert that tells you when you are nearing failing levels. What makes the PDT 700K unique is

More Info Add to cart

GTS900K Premium Combination Wrist Strap and Footwear Testing Station

The GTS900K Deluxe Dual Combo Tester is a three-state touch tester designed for fast and accurate testing of ESD heel grounders and wrist straps. The GTS900K incorporates a unique dual test

More Info Add to cart

GTS600K Combination Wrist Strap and Footwear Testing Station

The GST600K tester is a space-saving, versatile combo grounding tester that allows for accurate and cost-effective testing of ESD ground devices. The GTS600K is the best value combination tester

More Info Add to cart

WST200 – ESD Wrist Stap Tester

The WST200 is a time saving, portable wrist strap tester that is easy to transport to test that operators are properly grounded. The WST 200 tester ensures that basic ESD protection is met by

More Info Add to cart

PGT120.CU- Calibration Verification Device

Verify that your PGT120 combo testers are calibrated and in working order. The PGT120.CU device is designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120

More Info Add to cart

PDT78PV – Verification Unit for the PDT700K and PDT800K

PDT78PV

VerifyÂ that the PDT700K and PDT800K combo tester are operating correctly. The PDT700K and PDT800K are factory calibrated and annual calibration is not necessary. The PDT78PV verification

More Info Add to cart

Address & Hours

Transtech ESD Mexico S. de R.L. de C.V.

Av. Santa Laura # 304 Colonia Santa Margarita
Zapopan, Jalisco C.P.45140 Mexico

8:30am - 5:30pm EST Monday - Friday

Translate Â»