Warmbier Products

Showing all 29 results

Warmbier METRISO® 3000 ESD Audit Kit

The METRISO® 3000  ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020  and IEC 61340-5-1 and for
More Info Add to cart

Add to quote

Warmbier METRISO® B530 ESD Audit Kit

The METRISO® 3000  ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020  and IEC 61340-5-1 and for
More Info Add to cart

Add to quote

Warmbier EFM51.VK Electrostatic Field Meter Verification Kit

Verification Kit for measuring electrostatic fields and electrostatic charges, as well as the body voltage of a person while performing the walking test. Additionally, the decay time and the offset
More Info Add to cart

Add to quote

Warmbier EFM51 Plus Electrostatic Field Meter

EFM51 Plus - Field Meter with Case
The Wolfgang Warmbier EFM51 Plus is a handheld meter to quickly detect and measure electrostatic charge accumulation on surfaces. The EFM51 Plus is a full-featured hand-held field meter used to
More Info Add to cart

Add to quote

Warmbier EFM51 Electrostatic Field Meter

The Wolfgang Warmbier EFM51 is a handheld meter to quickly detect and measure electrostatic charge accumulation on surfaces. The EFM51 is a full-featured hand-held field meter used to perform static
More Info Select options

Warmbier ESD Starter Kit with Field Meter and SRM Meter

A kit to test basic ESD measurements such as surface resistivity and electrostatic fields. A complete and very useful tool kit for testing and measuring different products and materials within an
More Info Add to cart

Add to quote

Warmbier 7100.EFM51.CPS.SET Charge Plate System without EFM® 51 (for retrofitting)

7100.efm51.cps Charged plate set without EFM® 51 for retrofitting
The Wolfgang Warmbier EFM51.CPS is used to retrofit the EFM® 51  to enable the meter to measure and evaluate an ionizer's efficiency. The Warmbier 7100.EFM51.CPS.SET includes
More Info Add to cart

Add to quote

Warmbier EFM51.CPS Charge Plate System and Field Meter

The Wolfgang Warmbier EFM51.CPS is used to measure and evaluate an ionizer's efficiency as well as fully functioning field meter. The EFM51 is a full-featured hand-held field meter
More Info Add to cart

Add to quote

Warmbier Walking Test Kit WT5000 Electrometer

Perform the ESD Walking Kit on Floors: Test and graph the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The WT5000 Walking Test Kit has
More Info Add to cart

Add to quote

Warmbier EFM51WT Field Meter Walking Test Kit

A hand-held meter used to test the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The electrostatic charge of a person walking on an ESD
More Info Add to cart

Add to quote

Warmbier METRISO® 3000 High Resistance Test Kit

A Surface Resistance Test Kit capable of measuring a wide resistance range and complete the tests required for an ESD protection plan. The METRISO 3000 test kit measures a wide
More Info Add to cart

Add to quote

Warmbier METRISO®B530 Surface Resistance Test Kit

Take quick and accurate ESD measurements of materials with this high resistance testing kit. The Metriso® B530 test kit efficiently measures a wide resistance range and is suitable for
More Info Add to cart

Add to quote

Warmbier SRM200 Pocket Digital Surface Resistance Verification Kit

Full-featured digital Surface Resistance Meter with lightweight travel probes, two-point probe, data storage, temperature and humidity testing! SRM200 is a very useful instrument
More Info Add to cart

Add to quote

Warmbier SRM200 Pocket Digital Surface Resistance Meter

Full featured digital Surface Resistance Meter with data storage, temperature and humidity testing! SRM200 is a very useful instrument for checking surface resistance and resistance to
More Info Add to cart

Add to quote

Warmbier SRM110 Pocket Digital Surface Resistance Test Kit

Quickly and accurately take ESD resistance measurements with the Warmbier SRM110.  The LED readout will report the resistance in powers of 10 (example 10^10) and indicate if the surface is
More Info Add to cart

Add to quote

Warmbier 7220.880.SET Concentric Ring Probe Model 880, with Carrying Case

The 7220.880.SET concentric ring probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The
More Info Add to cart

Add to quote

Warmbier 890 Two Sided Probe

The 890 two-side probe is two ESD testing probes in one: a 5lb disk probe and a concentric ring probe.   The 890 two-sided probe is used with a surface resistance meter to take
More Info Add to cart

Add to quote

SR0065 5lb Surface Resistance Probes

5lb Disk Electrode Probes for use with Surface Resistance Meters Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in accordance with ESD Association Standards. The probe
More Info Add to cart

Add to quote

Warmbier 7220.410 Two Point Probe

The Wolfgang Warmbier 7220.410 two-point probes measures point-to-point surface resistance of small areas The 7220.410 two-point probe are designed to measure surface resistance of small
More Info Add to cart

Add to quote

Warmbier 7200.CL.49 Clamp Probes for Testing ESD Garments

olfgang-warmbier-7200.CL-49 ESD Garment-testing-clamp
The Wolfgang Warmbier 7200.CL.49 clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20 The 7200.CL.49 clamps probes are designed to evaluate ESD garments accounting ANSI
More Info Add to cart

Add to quote

Warmbier 7220.45 Hand Probes for Testing ESD Floors

wolfgang-warmbier-hand-probe-7220
The 7220.45 hand probes are designed to be used with resistance meters to evaluate ESD flooring according to ANSI ESD20.20. The probe is held in the hand and ensures excellent contact with skin while
More Info Add to cart

Add to quote

Warmbier TF-530 Digital Thermo-Hygrometer

wolfgang-warmbier-7100-tf530-thermo-hygrometer-wolfgang-warmbier
The TF-530 measures temperature and humidity which are required during ESD testing. The TF-530 Digital Thermo-Hygrometer is an easy-to-read and economical way to track temperature and humidity
More Info Add to cart

Add to quote

Access PRO: PGT120 Tester and FastPass Turnstile System

PGT120K100 AccessPRO with FastPass
The AccessPRO system with the PGT120 and the FastPass turnstile tests personnel grounding devices, logs test data and user IDs and controls access to an ESD protected area. The PGT120
More Info Add to cart

Add to quote

Warmbier PGT120.COM Data Logging ESD Tester

A complete data logging ESD test station for ESD heel straps/footwear and wrist straps. The PGT120.COM ESD grounding tester takes quick and accurate resistance measurements of ESD wrist
More Info Add to cart

Add to quote

Warmbier PGT120 Combination Tester for Personal Grounding Equiptment

The PGT120 is an easy to use and complete test station for ESD shoes and wrist straps. The personnel grounding tester is able to perform a quick and accurate control measurement of the ESD
More Info Add to cart

Add to quote

Warmbier PGT120.COM.DT2 Data Terminal For the PGT120.COM

The Data Terminal 2 for the Wolfgang Warmbier PGT120.COM creates a data logging ESD tester system that can integrate many USB accessories. The PGT Data Terminal 2 (DT2) is a modular system that
More Info Add to cart

Add to quote

Warmbier 7100.PGT120.COM.TC18 Data Terminal With Touch Screen For the PGT120.COM

The 7100.PGT120.COM.TC18 with Touch and Data Terminal for the Wolfgang Warmbier PGT120.COM Pair the PGT120.COM tester unit with the 7100.PGT120.COM.TC18 Touch Screen and Data Terminal and
More Info Add to cart

Add to quote

Warmbier PGT120.COM.DT3 Data Terminal with RFID For the PGT120.COM

7100-pgt120-com-dt3
The Data Terminal 3 for the Wolfgang Warmbier PGT120.COM Pair the PGT120.COM tester unit with the PGT120.COM Data Terminal3 and you receive real-time ESD testing with personnel identification,
More Info Add to cart

Add to quote

PGT120.CU- Calibration Verification Device

Verify that your PGT120 combo testers are calibrated and in working order. The PGT120.CU device is designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120
More Info Add to cart

Add to quote

Translate »